The Test Phase focuses on an empirical investigation in which the results describe the quality of the system: testing cannot confirm a system functions properly under all conditions but can establish that it fails under specific conditions. The earlier a defect is found in the development process the less expensive the fix. Testing early in the system life cycle reduces risks such as schedule delays or cost overruns due to incomplete or unacceptable components. In the Test Phase, testing of the system proves that the system meets all requirements, including those for performance and security. The in-depth security testing of this phase identifies any parts of the system that will not satisfy accreditation criteria. Finally, acceptance testing confirms the developed system satisfies the end users who identified the business need and the requirements.
1.0: Objectives / Goals
2.0: Deliverables and Approvals
4.0: Tasks and Activities
Successful completion of the Test Phase should comprise:
The purpose of the Test Phase is to guarantee that system successfully built and tested in the Development Phase meet all requirements and design parameters. After being tested and accepted, the system moves to the Implementation Phase.
Back To Top
SDLC deliverables help State agencies successfully plan, execute, and control IT projects by providing a framework to ensure that all aspects of the project are properly and consistently defined, planned, and communicated. The SDLC templates provide a clear structure of required content along with boilerplate language agencies may utilize and customize. State agencies may use formats other than the templates, as long as the deliverables include all required content.
The development and distribution of SDLC deliverables:
During the development of documentation, the Development Team should:
The following is a listing of deliverables required of all projects for this phase of work.
Test Analysis Approval Determination – summarizes the system’s perceived readiness and is attached to the Test Analysis Report as a final result of the test reviews.
Test Problem Reports – document problems encountered during testing; are also attached to the Test Analysis Report.
· Document detailed results of testing
Information Technology Systems Certification & Accreditation – includes completion of a Security Risk Assessment, Sensitive System Security Plan, Security Operating Procedures, Security Test and Evaluation, and Certification Statements.
· Assess technical and non-technical safeguards to determine the extent to which the system meets security requirements
· Obtain formal declaration by a Designated Approval Authority (DAA) that an information system is approved to operate in a particular security mode using a prescribed set of safeguards at an acceptable level of risk
Defect Log – tracks and summarizes in a tabular format defects or bugs found during testing. Defects may be documented via multiple commercially available bug tracking tools or manually in a spreadsheet.
N/A – The Defect Log does not require approval.
Readiness Document – consolidates summary information regarding the current status of the system and the project and provides decision makers with the information necessary to make a “Go-No Go” decision. It should include a checklist for all work products, User Acceptance Test results, other quality control checks such a peer review, and results of the system walkthroughs.
All deliverables other than those identified as Updates should be developed in this phase. Deliverables identified as Updates should be revisited and enhanced as necessary as prescribed in this phase.
Deliverables produced during this phase must be reviewed in detail and should follow the approval path as defined in the above table. A signature page or section should accompany each deliverable requiring approval.
DoIT will periodically request copies of these documents as part of its oversight responsibilities.
The following personnel participate in the work activities during this phase:
Responsible – Describes role that executes the activities to achieve the task.
Accountable – Describes roles that own the quality of the deliverable and sign off on work that Responsible provides.
Consulted – Describes roles that provide subject matter expertise.
Informed – Describes roles that receive information about the task.
The Roles and Responsibilities page has detailed descriptions of these roles and their associated responsibilities.
The Project Manager ensures the following prerequisites for this phase have been completed:
During the Test Phase, the Development Team frequently may discover problems with interfaces and functions that require repair.
The Project Manager should confirm and review any testing tools and defect tracking mechanisms and the change management tool used in the system development.
The Project Manager monitors project performance by gathering status information about:
The Project Manager also organizes and oversees systematic quality management reviews of project work as a part of monitoring the project performance.
To measure project effort at all phases of the life cycle, the Project Manager establishes timelines and metrics for success at each phase of work when planning project tasks.
The PMBOK, fourth edition, provides additional details on controlling project work in sections 4.4 and 4.5 and on project scope control in section 5.5.
The Project Manager updates the PMP routinely (at least quarterly) to ensure the PMP reflects project performance accurately. Review project performance controls and risks for deviations from the baseline.
Information distribution is one of the most important responsibilities of the Project Manager. The Project Manager reviews and updates the Communication Management Plan at least quarterly to document potential stakeholder changes. The Project Manager redistributes the updated PMP and risk management information according to the revised Communication Management Plan. PMBOK, fourth edition, section 10 contains additional details on project communications and information distribution.
The Project Manager conducts risk assessments during the Test Phase; these activities include:
These activities occur throughout the project duration to track and mitigate any new or updated project risks. PMBOK, fourth edition has details for risk management activities in section 11, particularly in sections 11.2 through 11.6.
If data migration is in scope, the Project Manager reviews and executes the Conversion Plan to migrate legacy data to the new system. The migration involves entering data into the new system and verifying that the migrated data is correct. Having correct data in the new system is essential to its functioning as intended. A data migration plan is important for transformation, migration, and modernization projects; entirely new systems will likely have no data to convert and have no Conversion Plan.
A few points about data conversion:
One method of verifying data integrity is parallel operations during which the old system runs simultaneously with the new system. The output from each system is compared; if all is correct, the new system is certified. If the new system fails in any way, continue operations on the old system until all problems are resolved.
The Development Team conducts the system tests according to the test plans and documents all results on the Test Analysis Report, Test Problem Reports, and Test Analysis Approval Determination. System testing is conducted on a complete, integrated system to determine compliance with all requirements. System testing includes tests to ensure that the developed system meets all requirements.
Return any failed components to the Development Team for correction; move the passing components on to security testing.
Testing may be one of two approaches:
Testing may follow either a black box testing or a white box testing methodology.
Regression testing focuses on revealing errors in functions that did work correctly but stopped working due to modifications. Regression testing typically involves repeating entire test scripts to ensure all functionality operates correctly after a unit or component has been modified.
The Development Team should prepare to perform non-functional tests such as load, usability, and security testing. During load testing, performance tests stress the system and indicate if the system can handle large quantities of data or end users. The Development Team can automate testing to expedite the process and ensure consistency.
Regardless of the testing methodology, the Development Team updates the RTM to reflect all test results and ensure traceability back to the original requirements. When all testing is finished, an audit of the testing should show test results for every element of the system and traceability to its corresponding requirement.
The Development Team executes the security/penetration tests and documents all test results. Return any failed components to the developers for correction; move the passing components on to acceptance testing after all components have passed integration and security testing.
Test security controls prior to the system deployment to uncover all design and implementation flaws that might violate DoIT’s security policy. Security testing involves numerous methods, such as analyzing system design documentation, inspecting test documentation, and independently executing functional and penetration testing.
State policy for IT systems requires that all Executive Branch agencies certify and accredit IT systems and sites under their ownership and control. The Development Team should review the DoIT Information Technology Security Certification and Accreditation Guidelines and the project’s SSCD for any actions necessary to enable the system to become certified and accredited prior to implementation. These documents are available at the DoIT State Information Technology Security Policy and Standards webpage.
The Development Team starts and documents the acceptance testing. Confirm that the developed system meets all requirements as stated in the SRD. Review, rework, and retest any failed components. When all components pass acceptance testing, the system is ready for implementation.
During the Test Phase, problems with interfaces and functionality are frequently discovered and require fixes. The Project Manager ensures that the documentation reflects any changes from all previous phases as well as changes that occurred during this Phase. This documentation includes the Conversion Plan, the Operations or Systems Administration Manual, the Maintenance Manual, and the Training Plan. The Project Manager coordinates these updates.
Bearing in mind any modifications that result from testing, the Project Manager and Development Team review implementation procedures, including any necessary resources and information, for deploying the system in its target environment.
The Agency CIO and Project Sponsor decide whether to perform additional testing or to proceed to the next phase, Implementation. They review the system requirements, the user acceptance criteria, and the user acceptance test results and consult with others about the condition of the project and the state of completeness of the system. Using the requirements and acceptance criteria as a quantitative base, they consider other qualitative factors through a collaborative discussion to arrive at the “Go-No Go” decision. This critical project decision can move the system to a production state.
The Project Manager and the Development Team prepare and present a project status review for the Agency CIO, Project Sponsor, Executive Sponsor, and other project stakeholders after completing all Test Phase tasks. This review addresses:
The Project Manager compares actual project performance to the PMP and the projected cost of the project to determine any variances from the cost baseline during the phase-end review. The Project Manager also performs a comprehensive risk assessment of the project to update the Risk Register before beginning the next phase, Implementation.
The Project Manager must obtain deliverable approval signatures before proceeding to the Implementation Phase.
Update the project documentation repository upon completion of the phase-closure activities.
At the end of the Test Phase, the Development Team has completed a working, fully tested information system that meets all business and technical requirements. The approval of the Test Phase deliverables, the completion of the Test Phase project status review, and the approval to proceed to the next phase, signify the end of the Test Phase.
100 Community Place, Crownsville, MD 21032
300-301 West Preston Street, Baltimore MD 21201
410-697-9700 - Dial 7-1-1 to place a call through Maryland Relay