Notice: JavaScript is not available in your browser. Some enhanced features will not be available until JavaScript is enabled.

Contracts

Hardware 2012 Contract Links

Hardware 2012 Master Contract FAQs

Agencies

Are Requesting Agencies required to send the Purchase Order Request for Proposals (PORFP) to every Master Contractor in the designated Functional Area or Areas?
May a Requesting Agency send a PORFP only to Master Contractors certified as Small Business Reserve (SBR)?
May a Requesting Agency send a PORFP only to Master Contractors certified as a Minority Business Enterprise (MBE)?
Who will actually send the PORFP to the Master Contractors?
Is there a mailing list that a Requesting Agency can use to send out a PORFP?
Is it required that Department of Information Technology (DoIT) review a Requesting Agency PORFP prior to release to the Master Contractors?
How long will DoIT take to review an award recommendation for a PORFP over $25,000?
Where do agencies go to find guidance on the PORFP process?
Are Requesting Agencies required to follow up with Master Contractors who fail to submit a PORFP Feedback Response Form?
Are Requesting Agencies required to submit completed PORFP Feedback Response Forms to DoIT?
How can a Requesting Agency track the status of a PORFP?
Are procurements executed under the Hardware Master Contract subject to DoIT review and assessment?
Is there a limit to how much services can be acquired under a Hardware purchase order?

Master Contractors

Agencies:

Are Requesting Agencies required to send the PORFP to every Master Contractor in the designated Functional Area or Areas?

With the exception of PORFPs designated as Small Business Reserve (SBR) Only (See Question #2 below), agencies must email the PORFP to ALL Master Contractors listed under the Manufacturer Product Line for which the PORFP has been issued. If the agency does not know the Manufacturer of the product sought, the agency must email the PORFP to ALL Master Contractors in the Functional Area or Areas. Based on an evaluation of Master Contractor proposals received in response to a PORFP, agencies will select a Master Contractor to provide the requested Hardware, Installation and/or Training Services, and/or Manufacturer Maintenance.

back to top
May a Requesting Agency send a PORFP only to Master Contractors certified as Small Business Reserve (SBR)?

Yes. PORFPs may be designated as SBR Only. Also see Question #3 below.

back to top
May a Requesting Agency send a PORFP only to Master Contractors certified as a Minority Business Enterprise (MBE)?

No. With the exception of PORFPs designated as SBR Only, agencies must email the PORFP to ALL Master Contractors listed under the Manufacturer Product Line for which the PORFP has been issued for a specific Functional Area or Areas. If the agency does not know the Manufacturer of the product sought, the agency must email the PORFP to ALL Master Contractors in the Functional Area or Areas.

back to top
Who will actually send the PORFP to the Master Contractors?

The Point of Contact (POC) from the agency requesting the products and/or services must email the PORFP to the appropriate Master Contractors.

back to top
Is there a mailing list that a Requesting Agency can use to send out a PORFP?

Yes. Click on Select Master Contractors Contact List from the Hardware Contract 2012 Links box. Follow the prompts to filter, select, and export to email the appropriate list of Master Contractors applicable to the agency’s PORFP. If the PORFP is designated as a Small Business Reserve (SBR) Only then agencies will filter, select and email the PORFP only to Master Contractors designated as SBRs. Because Master Contractors are required to regularly update their contact information with status or contact changes, agencies should export the data from the web page each time that a PORFP is to be sent, rather than saving and reusing it in the future.

back to top
Is it required that DoIT review a Requesting Agency PORFP prior to release to the Master Contractors?

No. DoIT review of the PORFP is not required prior to release to the Master Contractors. However, for awards over $25,000, the Requesting Agency must send an award recommendation to DoIT for review and approval prior to the award being issued.

back to top
How long will DoIT take to review an award recommendation for a PORFP over $25,000?

The DoIT turnaround time on an award recommendation for a PORFP over $25,000 depends largely on the quality of the award recommendation by the Requesting Agency. Agencies should use the Hardware 2012 Award Package Checklist to create the recommendation. Well written award recommendations with all necessary elements take less time to review and approve than those requiring follow-up with the agency.

back to top
Where do agencies go to find guidance on the PORFP process?

Click on PORFP Procedures from the Hardware 2012 Contract Links box.

back to top
Are Requesting Agencies required to follow up with Master Contractors who fail to submit a PORFP Feedback Response Form?

Yes. Requesting Agencies are responsible to ensure that all Master Contractors who do not submit proposals do submit a PORFP Feedback Response Form.

back to top
Are Requesting Agencies required to submit completed PORFP Feedback Response Forms to DoIT?

No. DoIT will review Feedback Response Forms during periodic contract management assessments.

back to top
How can a Requesting Agency track the status of a PORFP?

Agencies must distribute and track the status of their own PORFPs. Agencies should establish electronic and physical files for organizing and storing all related email, proposals, feedback forms, etc. Agencies must also follow ADPICS procedures for establishing Purchase Orders, and can check ADPICS for DoIT approval of any Purchase Orders over $25,000.

back to top
Are procurements executed under the Hardware Master Contract subject to DoIT review and assessment?

Yes. DoIT will review and assess a portion of the procurements executed under the Hardware 2012 Master Contract. The goal of such assessments is to determine that Requesting Agencies and Master Contractors are adhering to required contract procedures, terms and conditions.

back to top
Is there a limit to how much services can be acquired under a Hardware purchase order?

Yes, the value of Functional Area IV services cannot exceed 49% of the purchase order.

back to top

Master Contractors:

How will Master Contractors know about PORFP opportunities for which they can compete?

All Master Contractors listed under the Manufacturer Product Line for which a PORFP has been issued for a specific Functional Area are to receive the PORFP. Based on an evaluation of proposals received in response to PORFPs, a Master Contractor will be selected to provide the requested Hardware, Installation and/or Training Services and/or Manufacturer Maintenance. If the PORFP is designated as Small Business Reserve (SBR) Only, then the PORFP will be sent only to certified SBR Master Contractors.

back to top
Do Master Contractors have to reply to every PORFP that they receive?

Yes. Each Master Contractor must submit one of two possible responses by the specified proposal due date to each PORFP it receives: 1) a proposal, or 2) a PORFP Feedback Response Form explaining why the Master Contractor is not submitting a proposal.

back to top
Who do Master Contractors contact if they have questions or concerns about a PORFP that they have received?

Each PORFP includes a designated POC and complete contact information, to whom all questions or concerns must be addressed.

back to top
How can Master Contractors update contact information on the Hardware Master Contract web page?

Master Contractors have the ability to update their company’s contact information as needed on the Hardware 2012 Master Contract web site. Each Master Contractor received an email giving them a username and password to log in to the Master Contractor Administration System. If a Master Contractor did not receive login information, an email should be sent to Hardware.doit@maryland.gov. Note - agencies will distribute PORFPs according to the Master Contractor’s PORFP contact information shown on the web page. It is incumbent upon each Master Contractor to ensure that all of their information on the web site is correct. If at any time during normal business hours assistance is needed, please send an email to Hardware.doit@maryland.gov.

back to top
Do certified MBE Master Contractors still have to meet MBE goals?

Yes. All prime contractors must meet or exceed the established MBE goal for each PORFP issued under Functional Area IV – Installation and Training Services. For more information on the MBE Program, please go to the MBE web site at http://www.mdot.state.md.us/MBE_Program/Index.html. Also see the Hardware 2012 RFP Attachment D on MBE requirements.

back to top
If a Master Contractor has 8(a) certification, do they automatically qualify as a State of Maryland SBR or MBE?

No. Neither 8(a) certification through the Small Business Administration, a federal agency, nor certification through the Federal Disadvantaged Business Enterprise (DBE) Program is the same as Maryland MBE certification. For more information on becoming a certified Maryland MBE, go to MDOT’s MBE web site at http://www.mdot.state.md.us/MBE_Program/Index.html. For more information on becoming a certified Maryland SBR, go to DGS’ SBR website at http://www.dgs.maryland.gov/SmallBusiness/.

back to top
Where can Master Contractors find certified Maryland MBE companies with whom to partner?

The Hardware 2012 Master Contractor list identifies Hardware Master Contractors that have indicated that they are certified under MDOT’s MBE program. As MBE status may change, partners should confirm the current MBE status on MDOT’s MBE web site at http://www.mdot.state.md.us/MBE_Program/Index.html.

back to top
Can Master Contractors meet with the agencies to find out their future needs?

Master Contractors may meet with agencies to find out about their organization and business processes. Please do not spend time marketing the company and definitely do not discuss possible solutions to problems as this could disqualify Master Contractors from submitting proposals to the agency’s formal solicitations.

back to top
May Master Contractors submit a PORFP Feedback Response Form online for a previously issued PORFP?

Yes. Master Contractors may submit a PORFP Feedback Response Form online for any Hardware Master Contract PORFP previously or currently issued, even if the Hardware 2012 PORFP has been awarded. However, Master Contractors are strongly encouraged to submit feedback forms in a timely fashion.

back to top
May Master Contractors edit a PORFP Feedback Response Form after it has been submitted?

No. Once the PORFP Feedback Response Form has been submitted for each PORFP for which Master Contractors decline to submit a proposal, the data will be accessible only in "read only" format. The submitting Master Contractor should contact the PORFP POC to discuss off-line edits.

back to top
May Master Contractors submit one PORFP Feedback Response Form for multiple PORFPs?

No. An individual PORFP Feedback Response Form must be submitted for each PORFP for which Master Contractors decline to submit a proposal.

back to top
May Master Contractors view PORFP Feedback Response Forms submitted by other Master Contractors?

No. Master Contractors may not view PORFP Feedback Response Forms submitted by other Master Contractors.

back to top
How will the State use data provided in the PORFP Feedback Response Form?

The information from the PORFP Feedback Response Form will assist DoIT in improving the quality of PORFPs and the PORFP process, and in ensuring that the Hardware 2012 Master Contract is a successful vehicle for the business community and the State.

back to top
How do companies become Hardware Master Contractors?

Master Contractors may be added to the current Hardware 2012 Master Contract every three years during an announced Expansion Window. Please contact Hardware.doit@maryland.gov for more information.

back to top
What financial documentation is a Master Contractor required to provide with a response to a PORFP?

A screen shot of the current MSRP as of the date of the PORFP response must be provided with each proposal. Subject to the approval of the State of Maryland, a comparable substitute directly from the Hardware Manufacturer or Distributor may be acceptable.

back to top
How do Master Contractors add a Manufacturer Product Line for which they are newly authorized to sell?

Each Master Contractor in a given Functional Area may add additional Manufacturer Product Lines in that Functional Area throughout the life of the Hardware 2012 Master Contract. To add a Manufacturer Product Line, a Master Contractor must submit a Letter of Authorization signed by the Manufacturer or Distributor for each new product line proposed. Signed Letters of Authorization must be submitted in PDF format to Hardware.doit@maryland.gov. Once the Letter of Authorization has been confirmed by DoIT, the Manufacturer Product Line will be added to that Master Contractor’s list of product lines available.

back to top
Where can a list of all the Hardware Master Contractors be found?

Under Master Contractor Contact Information in the Contract Links panel.

back to top

100 Community Place, Crownsville, MD 21032

300-301 West Preston Street, Baltimore MD 21201

410-697-9700 - Dial 7-1-1 to place a call through Maryland Relay